1. 4 channel outputs, each channel including one AC output for conventional lamps, non-dimmable lamps, or DC 1-10V for dimmable fluorescent lamps.
2. Each channel can be set as dimming/ switch/ fluorescent mode.
3. Connectable to ECP control panel for scene recall.
4. Programmed 6 scenes by control panel: ECP-103 or ECP-103A.
5. Can set delay off time for AC OUT power from 1 to 99 seconds.
6. Each scene can be set fade in/ fade out.
7. Current detection.
8. Maximum 99 zones.
Power:AC 90-240V, 45-63Hz
Protocol: RS-485 (EDX)/ DMX-512
Capacity: 4CH, 5A per channel, total: 20A
DC output :DC 1-10V (for fluorescent lamp)
Signal Connector: 6P6C phone jack/ 4PIN green terminal
Dimension : 100(W)*240(H)*57(D)mm